Chapter 54 Production
But these are not important now. No matter where the moonlight alloy comes from, the important thing is how to use it!
The first thing to do was to get rid of the impurities on the surface of this piece of moonlight alloy. In the previous life, this would have required a large blast furnace, but it is different now. For a magician, all power is concentrated in himself, and he is everything!
Sith used his mental power to fix the moonlight alloy in the air, and then the world of rules appeared in front of him, magic surged, and the thread of rules was stirred. A ball of flame was generated from the void in the blink of an eye, surrounding the dark moonlight alloy!
The raging flames are constantly burning in the void, the layer of minerals on the surface of the moonlight alloy is slowly melting, and on the Sith side, the magic power is also constantly outputting. It would be bad if it was interrupted at this time.
As the flames continued to heat up, the ore melted and dripped, exposing the crystal-clear moonlight alloy bit by bit. Sure enough, this moonlight alloy was like capturing the moonlight and sealing it into the alloy. If you don't mention what it is, If you look at it for the first time, everyone will probably think it is a work of art!
The Sith are no exception...
Phew! ! !
The Sith withdrew his magic power, and the void flame lost its support and began to dissipate, leaving behind the moonlight alloy that had fully emerged.
The palm part of the steel suit emerged in an instant, covering Sith's right hand, and then Sith took the moonlight alloy, which was still astonishingly warm, in his hand.
This alloy is indeed beautiful. I don’t know how the alchemists in ancient times came up with the method of refining it. It is strange that this ingenious and wonderful alloy comes from artificial creation.
I don’t know what the alchemy master of Xiao Wu’s master’s generation was like.
Sitting on the experimental table, Sith was about to start making a magic sniper rifle. For the same reason, he had been promoted to a formal magician, so he could not use the method of engraving a magic circle in the barrel, but must use the method of a formal magician. Rules leverage the way!
Every official magician has his own different world view, so each official magician's method of leveraging the rules is different. All the Sith have to do is to lever their own threads of rules and add them to the magic weapon!
As for how to use weapons to pry, Sith has already started thinking about it since the day he was promoted. Magicians should have forward-looking wisdom, so the current magic weapons should not be as casual as they were during the magic apprentice period.
So what to do? The Sith's answer is: incorporate the thread of rules into the magic weapon!
The so-called line of rules is just the real world in the eyes of the Sith. In other words, if you think it exists, then it exists. If you think it does not exist, you will never be able to see it, and the Sith wants to There is only one thing to do, when making a magic weapon, directly incorporate the thread of rules into the gun!
Moreover, depending on each weapon, the incorporation of the line of rules is also different. Right now, the first thing the Sith need to make is a magic sniper rifle!
And if you want to maximize the attack power of the magic sniper rifle and truly become the kind of weapon that kills with one hit and become the trump card in the hands of the Sith, then you must maximize the rules!
Therefore, in Sith's vision, each magic bullet of the magic sniper rifle is specially made. It is not an ordinary magic bullet. It can collect one end of many rule lines in it, just like a huge bullet with One end of the elastic net is closed!
When firing, one end of the net is released. In this case, these regular threads will produce a huge tremor due to the release of one end, forming an extremely powerful attack!
The power of this attack is unstoppable. Defensive magic is useless, and neither is the eternal passive defense magic array. According to Sith's expectations, the attack intensity of this gun may even exceed the upper limit of a first-level magician's attack!
But it is precisely because of this attack intensity that every shot of the magic sniper rifle must go through a preparation. Just like a manually loaded bolt sniper rifle, every magic bullet must be pulled by the Sith's mental power. A section of the line of rules is fixed, which requires a lot of mental power. Sith has just reached the mental power of a first-level magician and cannot shoot a few shots. Therefore, it can only be used as a trump card for the time being.
...
Sith began to rummage around in the laboratory, preparing to prepare the materials Xiao Wu gave him. This was the only way to melt the moonlight alloy. Other than this method, he could only use water to grind it bit by bit. It melts it point by point, but that is not what the Sith's current magic power can do.
These materials are not very rare. At least the Sith quickly found all of them in their own material reserves. They are all common things. However, if there is no formula, no one will know what these materials will look like after being prepared. Can melt the legendary moonlight alloy.
Sith began to prepare the recipe meticulously according to the steps mentioned in the formula. The order of adding each material, the amount of each material added, and the temperature of each heating are all strictly stipulated. Violation of any of them will result in the preparation of the ingredients. fail.
This job is no easier than making a sniper rifle. Even though Sith was very serious, he failed twice and was covered in sweat.
Finally, this material was successfully prepared. Just as described in the formula, it was a viscous liquid with a colorless and transparent color.
Sis stirred it laboriously again and prepared to start melting the moonlight alloy. But before that, he first had to make a mold for each part according to the design in his mind. When the moonlight alloy was melted, he started pouring it directly. Formed in one go!
Although this step is a bit complicated, it is not a big deal for Sith. There are enough materials in the laboratory. Soon, Sith will make the parts mold of the sniper rifle. As for the accuracy issue, just kidding, there is artificial intelligence Xiao Wu Existence, will the mold produced be purely about accuracy...
Taking two deep breaths, Sith told himself to calm down, and his eyes began to show that fanatical light again. This is also what he loves to do most, and whenever he does these things He was always extremely focused.
The viscous liquid was poured on the moonlight alloy. The moonlight alloy, which had been burned by the void flame for a long time without any reaction, began to melt like ice and snow poured with boiling water!
Sith placed the prepared mold, and the moonlight alloy was placed on top of it one after another. After melting, it went directly into the mold. without going through the third step.
Sith's hands are very skillful, but this step is controlled by Xiao Wu in his soul. He is not yet able to directly operate such a delicate experiment!
Each mold is filled with just the right amount of dripping, no more and no less. The whole action is very pleasing to the eye and has a different kind of beauty...The
next step is to wait for the alloy liquid to solidify.
Today's third update will be a bit late, but it will still be posted before 12 o'clock. If you don't want to wait, you can go to bed.
(End of chapter)